Front door, side panels and hinged back are all fully lockable. Only used for a couple of months, excellent condition with just a few light marks from use. A few small scratches on the rear where it has been wall mounted, you'll never see these once fixed to the wall. M6 screws, washers, cage nuts, 12-24 screws included - 20 of each. Numbered square hole rails can be converted to 12-24 threaded holes.
External dimensions in cm (HxWxD) 63.5 x 60 x 54.86. Maximum device depth 52.07cm. Due to its size and weight, this is collection only from a few miles south of Cambridge. The SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 lbs (90.7 kgs).
The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft.
The front, top, bottom and removable side panels are vented, which. Allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.The SRW12US comes fully assembled and ready to mount to the wall, or use Tripp Lite's optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy.
The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels. Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Rack equipment in 12U of space. Maximum load capacity of 200 lbs (90.7 kgs).Hinged Cabinet for Convenient Access. Swings away from the wall to allow easy back-door access to equipment and cabling during installation and maintenance.
Rotate cabinet 180° before mounting to open reversible doors left or right. Side panels and doors lock securely to help prevent damage, tampering or theft. Vented panels allow generous airflow that keeps equipment cool.Convenient ports with removable covers allow cable routing through top and bottom. Easy Enclosure and Equipment Installation. Mounts to wall or rolls on floor with Tripp Lite's optional SRCASTER caster kit. Wall-mounting holes spaced 16 in. Apart for standard wall stud placement. Vertical mounting rails adjust in 7/8 in. Increments to accommodate equipment up to 20.5 in.
Deep, such as network switches and patch panels. Rails support square-hole or 12-24 threaded-hole mounting. Rack spaces numbered for easy reference. Factory Preset Rack Depth (cm). Factory Preset Rack Depth (mm).
61.72 x 66.04 x 70.61. Unit Dimensions (hwd / cm). 63.5 x 60 x 54.86.
Weight Capacity - Stationary (kg). Number of Vertical Mounting Rails.
This item is in the category "Computers/Tablets & Networking\Enterprise Networking, Servers\Racks, Chassis & Patch Panels\Rackmount Cabinets & Frames". The seller is "flamenco_assassin" and is located in this country: GB. This item can be shipped to United Kingdom.